A fire door inspection is often treated as the finish line. The inspector visits, the doors are checked, and a report lands in your inbox.

In reality, the inspection is the starting point.

The real value sits in what happens next. A report that identifies fifty defects but leads to no action leaves a building exactly as exposed as it was before the inspector arrived. For the responsible person, it can create something worse: written evidence that problems were known about and not resolved.

Whether you manage a single office block or a portfolio of residential buildings, knowing how to read your fire door inspection report, prioritise the findings and close each defect out properly is what turns an inspection from a compliance exercise into genuine fire protection.

What Should a Fire Door Inspection Report Include?

A professional inspection report should give you far more than a pass or fail against each door. It should be detailed enough that a separate contractor could locate every door, understand every defect and know exactly what is needed to fix it.

A comprehensive fire door inspection report typically includes:

  • A location reference for every door, so each one can be found on site
  • The compliance status of each individual doorset
  • Clear descriptions of every defect identified
  • Photographic evidence supporting the findings
  • A risk rating for each issue
  • Remedial recommendations for every defect
  • Audit-ready documentation for your fire safety records

At Capital Fire Doors, every inspection carried out by our BM TRADA certified inspectors is delivered as a digital compliance report covering each of these points. If the report you have received is vague, lacks photographs or simply lists doors as "failed" with no explanation, it is worth asking whether it gives you enough to act on.

How Should You Prioritise Fire Door Defects?

Very few inspections of an occupied building come back with zero findings. The question is not whether there are defects, but which ones need attention first.

Risk ratings exist for exactly this reason. The exact categories vary between inspectors, but defects generally fall into three broad groups.

Defects That Need Urgent Action

These are issues that mean a door would barely perform, if at all, in a fire. Examples include a self-closing device that has been removed or no longer works, a door that will not close into its frame, holes or serious damage to the door leaf, or a door that is routinely wedged open. A fire door in this condition offers little protection, so these findings should be dealt with as a priority.

Defects That Need Short-Term Action

These reduce performance without disabling the door entirely. Damaged or painted-over intumescent strips, missing smoke seals, perimeter gaps outside tolerance, and loose or worn hinges often fall into this group. Left alone, they tend to get worse, and several minor defects on the same door can combine into a serious failure.

Defects That Can Be Planned In

Minor wear, missing signage or cosmetic damage that does not affect fire performance can usually be grouped into a planned programme of works. Bundling these together often reduces both cost and disruption.

Whatever the categories in your report, the principle is the same: deal with life safety first, work systematically through the rest, and keep a record of every decision.

Repair, Remediate or Replace?

One of the most common questions after an inspection is whether a door can be fixed or needs replacing altogether.

In many cases, repair is entirely appropriate. Replacing seals, adjusting closers, correcting gaps and swapping non-compliant ironmongery for fire-rated hardware can often restore a doorset to compliance without replacing the whole door.

Replacement usually becomes the better option when:

  • The door leaf or frame is structurally damaged
  • There is no evidence of fire certification, or the door's origin cannot be traced
  • Previous repairs have used incompatible or uncertified components
  • The combined cost of repairs approaches the cost of a new certified doorset

Our fire door repairs, maintenance and remediation service is built around exactly these decisions. Where replacement is the right call, our fire door installation team can supply and fit a compliant doorset.

Who Should Carry Out the Remedial Works?

This is where many well-intentioned remediation programmes go wrong. A fire door is a tested assembly. Every component, from the hinges to the intumescent strips, forms part of how that door achieved its fire rating. Fitting a generic closer, using the wrong seal profile or packing out an oversized gap with timber can all undermine the door, even if it looks better afterwards.

Basic tasks, such as reporting damage or checking that doors close properly, can sit with caretakers and facilities teams. Remedial works on the doorset itself should be carried out by a competent specialist who understands fire door certification and uses compatible, fire-rated components. For a closer look at what tends to go wrong, read our guide to the most common failures found during BM TRADA fire door inspections.

Why Re-Inspection Matters

Remedial work is not finished when the contractor leaves site. It is finished when someone competent has confirmed that each defect has actually been resolved.

Fire door re-inspection closes the loop. It confirms the work has been completed to the correct standard, updates the compliance status of every affected door, and gives you documented evidence that the issues raised in the original report were dealt with. Our inspection process includes remedial support and follow-up inspections for exactly this reason.

Keeping Records as the Responsible Person

Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person must ensure fire doors are kept in efficient working order and good repair. In England, multi-occupied residential buildings with storeys over 11 metres also carry specific fire door check duties under Regulation 10 of the Fire Safety (England) Regulations 2022, explained in the government's fire door guidance for responsible persons.

A complete record trail typically includes the original inspection report, evidence of the remedial works and the re-inspection results. Together, these documents show not only that problems were found, but that they were fixed.

Lessons From Inspecting Large Estates

Scale changes everything. Across 49 student accommodation blocks at the University of Southampton, our team inspected more than 15,000 fire doors serving bedrooms, kitchens and corridors, all completed during term time with minimal disruption. Every inspection followed BM TRADA Q-Mark standards, and the university received an estate-wide compliance record to support future remedial works and long-term planning.

For large portfolios, structured data like this is invaluable. It allows remedial works to be grouped by risk, by building or by defect type, turning a daunting number of doors into a manageable, prioritised programme.

From One-Off Inspection to Ongoing Compliance

Fire doors do not stay compliant on their own. Daily use wears seals, loosens hinges and knocks closers out of adjustment. An inspection captures the condition of your doors on one particular day, but compliance has to be maintained between inspections too.

That is why many building owners follow their initial inspection with pre-planned fire door maintenance, so minor defects are resolved routinely rather than piling up until the next visit. If you are unsure how often your doors should be checked, our guide on how often fire doors should be inspected sets out the typical intervals.

Need help acting on an inspection report? Speak to our team about remedial works, re-inspection and ongoing support.

Frequently Asked Questions (FAQs)

What should a fire door inspection report include?

A fire door inspection report should include a location reference for every door, the compliance status of each doorset, a description of every defect, photographic evidence, a risk rating and a clear remedial recommendation. It should be detailed enough to plan and prove every repair.

How quickly should fire door inspection defects be fixed?

There is no single legal deadline that covers every defect. Faults that stop a fire door working, such as a missing self-closer or a door that will not close, should be treated as urgent. Lower-risk defects can be scheduled into a planned programme, provided each decision is recorded.

Do fire doors need re-inspecting after repairs?

Yes, it is best practice. A re-inspection confirms each defect has been resolved correctly, updates the compliance status of every affected door and provides documented evidence for the responsible person's fire safety records.

Can a caretaker fix defects found during a fire door inspection?

Caretakers can carry out basic checks and report damage, but repairs to the doorset itself should be done by a competent fire door specialist. Incompatible components or incorrect methods can undermine the door's fire performance.